PRODUCT OVERVIEW Changing suspension components in your 1999-2006 Chevrolet Silverado or GMC Sierra 1500 can sometimes cause bump steer or unwanted toe changes during suspension travel. QA1's easy-to-install Bump Steer Kit corrects this problem. ELIMINATE BUMP STEER Bump steer is caused by misalignment in the suspension geometry, leading the wheels to turn slightly in and out as the suspension travels up and down. This can often result from static suspension drops or the use of drop spindles. These direct bolt-in kits relocate the outer tie rod end higher to improve the steering linkage angle through suspension articulation. EASY INSTALLATION The included hardware and stud taper does not require modification and is a no-drill installation. MADE IN THE USA QA1 suspension is proudly made in Lakeville, Minnesota.
This Part Fits:
| Year |
Make |
Model |
Submodel |
| 1999-2005 |
Chevrolet |
Silverado 1500 |
Base |
| 2004-2006 |
Chevrolet |
Silverado 1500 |
Hybrid |
| 1999-2006 |
Chevrolet |
Silverado 1500 |
LS |
| 1999-2006 |
Chevrolet |
Silverado 1500 |
LT |
| 2003-2006 |
Chevrolet |
Silverado 1500 |
SS |
| 2002-2006 |
Chevrolet |
Silverado 1500 |
WT |
| 2004-2005 |
Chevrolet |
Silverado 1500 |
Z71 Off-Road |
| 2002-2005 |
GMC |
Sierra 1500 |
Base |
| 2001 |
GMC |
Sierra 1500 |
C3 |
| 2002-2006 |
GMC |
Sierra 1500 |
Denali |
| 2002 |
GMC |
Sierra 1500 |
HT |
| 2005-2006 |
GMC |
Sierra 1500 |
Hybrid |
| 1999-2003,2006 |
GMC |
Sierra 1500 |
SL |
| 1999-2006 |
GMC |
Sierra 1500 |
SLE |
| 1999-2006 |
GMC |
Sierra 1500 |
SLT |
| 2002-2006 |
GMC |
Sierra 1500 |
WT |
